61 14 015 Removing and Installing/Replacing Power Distribution Box (on Battery)

61 14 015 Removing And Installing/Replacing Power Distribution Box (On Battery)







WARNING: Observe safety instructions of highvoltage system.







WARNING:
Observe safety instructions for handling vehicle battery.
Follow instructions on intelligent battery sensor (IBS).







Necessary preliminary work:
- Disconnect Both negative battery cables







Disconnect plug connection (1).
Open cover, release nut (3) underneath and disconnect positive battery cable. Tightening torque 61 21 4AZ.
Open cover (5) and release nut (4). Tightening torque 61 21 2AZ.
Using a suitable tool, expand locking bracket (6) at lower end and clip out.
Lift power distribution box (2) out of battery.