52 14 060 Removing and Installing/Replacing Valve Housing For Left or Right Front Lumbar Support (Normal/Electric)

52 14 060 Removing And Installing/Replacing Valve Housing For Left Or Right Front Lumbar Support (Normal/Electric)







Necessary preliminary tasks:
- Remove rear panel on front seat backrest







Release retaining screw (1).
Disconnect electrical plug connection.







Disconnect air hoses (1) and (2).

Installation:
Make sure air hoses (2) are correctly connected to valve block (colour coding: red/blue).
Housing on valve block must not be unclipped (leakage). If necessary, clip housing together.