66 31 006 Removing and Installing (Replacing) ACC Sensor

66 31 006 Removing And Installing (Replacing) ACC Sensor







Necessary preliminary work:
- Remove front bumper trim







NOTE: For a better view, graphic shows rear view with bumper support and ACC sensor removed.

Undo screws in marked area on the rear side of the ACC sensor (1).
Tightening torque 66 31 1AZ.
Remove ACC sensor (1) from holder (2).







IMPORTANT: Secure ACC sensor (2) against falling out.

Unfasten plug connection (1) and disconnect.
Remove ACC sensor (2).







After installation:
- Adjusting ACC sensor

Replacement:
- Carry out vehicle programming and encoding
- Adjusting ACC sensor