13 62 591 Removing and Installing/Replacing Pressure Sensor on Left Intercooler

13 62 591 Removing And Installing/replacing Pressure Sensor On Left Charge Air Cooler (S63)







Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove intake filter housing







Unclip Bowden cable for engine bonnet/hood actuator from transverse reinforcement (1).

Detach A/C line from holder.

Release screws on left and right.

Tightening torque 51 71 4AZ.

Remove cross-brace (1).

Installation:
Reinstall left and right holders for intake silencer housing.







Unlock plug (1) and remove.

Unfasten screws (2).

Tightening torque 13 62 7AZ.

Pull pressure sensor (3) out of left charge air cooler.

Installation:
Replace sealing ring on pressure sensor.







Installation:
Delete fault memory.