31 53 040 Removing and Installing/Replacing Right Output Shaft Bearing Block

31 53 040 Removing and installing/replacing right output shaft bearing block





Warning!
N62, N63:
Risk of short circuits!
There is a danger of short circuiting on account of the small distance between the bearing block screw connection and the starter motor.
Disconnect battery negative lead.





Necessary preliminary tasks:
^ Remove right output shaft





Release screws (1).

Remove bearing block from oil sump.

Installation:
Replace O-ring.

Tightening torque 31 60 1AZ.





Replacement:
^ Remove sealing caps