63 12 010 Removing and Installing or Replacing Left Headlight (Xenon Headlight)

63 12 010 Removing And Installing/Replacing Left Headlight (xenon Headlight)







WARNING:
Xenon headlight: Danger to life due to high voltage. Therefore disconnect xenon headlight from voltage supply.
Work on the entire xenon lighting system (ignition device, control unit and bulb) may only be carried out by qualified personnel.







Necessary preliminary tasks:
- Remove front bumper trim







Unfasten plug connection (1) and disconnect.
Unfasten screws (2).
Tightening torque 61 12 1AZ.







Only for left headlight:
Release plug connections (1) and disconnect.
Unfasten screws (2).
Remove fanfare horn (3).







Release screws (1).
Tightening torque 61 12 1AZ.
Remove headlight (2).







IMPORTANT: Follow instructions for handling light bulbs (exterior lights).

Replacement:
- If necessary, remove bulbs, observe bulb type







Replacement:
- Remove control unit for xenon headlights
- Remove ignition unit for xenon headlight
- If necessary, remove electric motor/electronics box for adaptive headlight







Installation note:
Adjust headlight.