Without Idrive

Resetting the System

Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

1. Start the engine, but do not start driving.






2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompanied by the word "Reset".






3. Press button 2 to confirm your choice of the Tire Pressure Monitor. The following display appears:






4. Press button 2 for approx. 5 seconds until the reading shown below is displayed:

5. Drive away. After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be monitored. The system reset is completed during you drive, and can be interruped at any time. When driving resumes, the reset is continued automatically. The indicator lamp goes out after the system reset is completed.