31 12 050 Removing and Installing/Replacing Left or Right Trailing Link

31 12 050 Removing and installing/replacing left or right trailing link







Necessary preliminary tasks:
- Remove front wheel
- Remove front underbody protection







Release nut (1); if necessary, grip at Torx socket.

Installation note:
Keep tension strut to swivel bearing connection clean and free from oil and grease.
Replace self-locking nut.
Tightening torque 31 12 2AZ.







Release bolt (1) and remove tension strut.
Raise locking nut (2) in area of bore and detach from front axle support.

Installation note:
Replace locking nut.
Tighten screw connection in normal position.
Tightening torque 31 12 1AZ.

�\�:

�°�:

� �:

0{�:

s��:

50�: