25 11 211 Replacing Shift Arm For Shift Lever Mount

25 11 211 - Replacing shift arm for shift-lever mount





Necessary preliminary tasks:
- Remove shift lever 25 11 000 Removing and Installing Shift Lever.
- Remove support bearing 25 11 245 Replacing Shift Arm Support Bearing from fixture





Lever out spring (1) with a screwdriver from lug (2) on housing.
Tilt spring upwards.





Remove bearing pin (1).
Remove shift arm.

Installation Note:
Grease bearing pins (1).





Detach support bearing 25 11 245 Replacing Shift Arm Support Bearing(1) from shift arm.

Installation Note:
Grease bearing pin of shift arm.
Fit support bearing (1) with opening (3) towards rear top on new shift arm.





Replace damaged bearing sleeve 25 11 235 Replacing Bearing Bushes for Shift Arm(1).