Replacing Ignition Unit for Left Xenon Headlight (With Xenon Bulb)

63 12 870 - Replacing ignition unit for left xenon headlight (with xenon bulb)





Warning!
Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (control unit, ignition unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights) Instructions for Handling Light Bulbs (Exterior Lights).





Important!
Ignition unit and xenon bulb are viewed as a single component and must not be separated.





Necessary preliminary tasks:
- Remove front left wheel arch trim 51 71 038 Removing and Installing/Replacing Front Left or Right Wheel Arch Cover (Front Section)





Note:
Headlight removed for purposes of clarity.

Unlock both retaining tabs and remove cover (1) in direction of arrow from headlight (2).

Installation Note:
Make sure cover (1) is correctly seated on headlight (2).





Disconnect plug connection (1).
Unlock spring wire clip (2) and fold downwards.
Remove ignition unit for xenon headlight (3) from headlight (4).

Installation Note:
Make sure ignition unit (3) is exactly seated on headlight (4).