Removing and Installing/Replacing Left or Right Underbody Panelling

51 47 ... - Removing and installing/replacing left or right underbody panelling





Necessary preliminary tasks:
Only if removing left underbody panelling:
- Remove rear underbody protection Removing and Installing/Replacing Rear Underbody Protection

Note:
Work shown on 320d by way of example, deviations in detail are possible in other models.





Release plastic nuts.
Release screws (1, 2 and 3).
Release expansion rivet (4).

Installation:
Replace faulty expander rivets.
Make sure underbody panelling is correctly seated.