Energy Diagnosis Vehicle Sleep Mode

Energy diagnosis: Vehicle sleep mode

The events in the case of an inhibited waking are described below. In the event of a fault, all the measures serve to ensure the starting capability of the vehicle and for diagnosis if the fault has caused a flat battery.







Index Explanation
1 Terminal R OFF
2 Registration of the cause or causes in the energy history memory
3 Deactivation of terminal 30g (30 or 60 minutes after terminal R OFF)
4 JBE sends the power down command 5 minutes after cutoff of terminal 30g
5 Reset of terminal 30g-f
6 Deactivation of terminal 30g-f
7 After terminal R off, the vehicle does not reach the idle state.
8 Terminal R ON Bus communication is active.