Removing and Installing/Replacing Lock for Left or Right Rear Seat Backrest (Through-Loading System)

52 26 311 - Removing and installing/replacing lock for left or right rear seat backrest (through-loading system)





Unlock rear seat backrest and fold down.

Note:
In event of faulty unlocking, perform emergency opening Emergency Actuator for Rear Seat Backrest.

Unclip Bowden cable from holders (1).
Unfasten screws (2).
Tightening torque 52 26 08AZ 52 26 Rear Seats (Through-Loading System).





Pull lock (1) out of installation opening slightly and unclip Bowden cable (2).
Remove lock completely from installation opening.

Installation:
Catches (2) on lock must not be damaged.
Bowden cable must be correctly anchored in catches (2).





Installation:
Slide guide lug (1) of lock into opening (2).





Adjusting lock:
- Slacken screws

- Firmly push engaged backrest back

- Tighten down screws