61 14 010 Removing and Installing/Replacing Distribution Box (on Battery)

61 14 010 - Removing and installing/replacing distribution box (on battery)





Warning!
Observe safety instructions Technician Safety Information for handling vehicle battery.





Necessary preliminary tasks:
- Remove luggage compartment trim on side panel on right
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead





Release screws (1) and remove bracket (2). Tightening torque 61 14 1AZ 61 14 Distribution Box, Current Terminals.





Disconnect plug connection (1).
Unlock plug housing (2) and release in direction of arrow.
Fold up covers on nuts (3).
Unscrew nuts (3). Tightening torque 61 21 2AZ Specifications.
Disconnect plug connection (4).
Disconnect plug connection of IBS cable (5).





Press locking brackets (2) downwards and unclip.
If necessary, using a screwdriver (1), expand locking bracket (2) at lower end and clip out.
Remove power distributor (3) towards top.