Front Door Window Regulator: Service and Repair

51 33 000 - Removing and installing (replacing) power window unit in left or right front door





Necessary preliminary tasks:
- Remove door window glass Service and Repair





Lever out cover (1) and release nut (2).

Installation:
Nut is tightened down when door window glass is adjusted.
Tightening torque 51 33 1AZ [1][2]51 33 Power Windows, Front.





Release drive cable from clips (1).
Release nut (2) and feed out front power window rail (3).
Release nuts (4 and 5) and feed out rear power window rail.

Installation:
Clip drive cable correctly into clips (1).
Nut (2) must again be correctly covered with adhesive foil.
Tightening torque 51 33 1AZ [1][2]51 33 Power Windows, Front.





Replacement:
Release screws (1) and detach flat motor (2).
Tightening torque 67 62 1AZ [1][2]51 33 Power Windows, Front.