65 11 080 Removing and Installing/Replacing Radio Receiver

65 11 080 - Removing and installing/replacing radio receiver





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove operator unit for heater/air conditioner 64 11 377 Removing and Installing/Replacing Heater/Air Conditioner Operator Unit (Version Without CCC/ASK)





Note:
Comply with notes and instructions on handling optical waveguides 61 00 ... Notes on Handling Optical Fibers.





Release screws (1).
Pull back radio receiver (2) slightly.
Disconnect associated plug connections and remove radio receiver (2).

Installation Note:
Make sure the rear guide pin of the radio receiver (2) is correctly seated in the associated mounting.





Replacement:
Carry out programming/coding Programming and Relearning.