12 14 523 Replacing Inlet Camshaft Pulse Generator

12 14 523 Replacing Pulse Sensor On Intake Camshaft (N52T)







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove acoustic cover







Unlock plug (1) and remove.
Release screw.

Installation:
Replace screw.

Tightening torque 13 62 1AZ.

Remove pulse sensor (2).

Installation:
Replace sealing ring.







NOTE:
Check stored fault messages.
Delete fault memory.