12 14 524 Replacing Exhaust Camshaft Pulse Generator

12 14 524 Replacing Pulse Sensor On Exhaust Camshaft (N52T)







IMPORTANT Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove acoustic cover







Unfasten screw (1)
Tightening torque 12 90 2AZ.
Release holder (2) from cylinder head.







Unlock plug (1) and remove.
Release screw.

Installation note:
Replace screw.
Tightening torque 13 62 1AZ.

Remove pulse sensor (2).

Installation note:
Replace seal.







NOTE:
Check stored fault messages.
Delete fault memory.