Front Subframe: Service and Repair

31 11 001 Replacing Front Axle Support







IMPORTANT:
Before removing front axle support:
In order to avoid damage to vehicle hoist, perform weight compensation on vehicle.
Load spring strut domes with sand bags.







WARNING: Secure engine in installation position with special tool to prevent it from falling down.







Necessary preliminary tasks:
- Lower front axle support
- Remove both lower wishbones from front axle support
- Remove both trailing links from front axle support
- Remove hydraulic steering gear







Graphic shows:F01
Remove both engine mounts from front axle support
Take front axle support down and set down on a suitable surface.

Installation note:
Use previous front axle support as a template for modifying or replacing small parts.







Installation note:
Only on F01/02 vehicles with ARS:
Adapt holder of ARS hydraulic line if required.
Due to a modification on axle support (1), if necessary cut off tab (2) at the mark.







After installation:
- Perform wheel alignment check