51 16 383 Removing and Installing/Replacing Damper for Glovebox

51 16 383 Removing And Installing/Replacing Damper For Glove Box







When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.







Necessary preliminary tasks:
- Remove right glove box







NOTE: For clarification purposes, the damper rod has already been removed from the retaining bracket of the glove box lid in the graphic.

Unclip damper rod (1) from glove box lid retaining bracket (2) and slide back in direction of arrow.







Turn damper (1) approx. 45° in direction of arrow and disconnect.