52 14 209 Removing and Installing Carrier Plate For Rear Monitor

52 14 209 Removing And Installing Carrier Plate For Rear Monitor







Special tools required:
- 52 0 050







Necessary preliminary work:
- Remove rear monitor







Release tacker in marked area from carrier plate (1).
Remove clamps (2) at top left and right.







Unscrew nuts (1).
Remove carrier plate (2).







Installation:
Mount head restraint to pretension backrest cover.
The seam of the backrest cover must not be wavy and must be flush with the backrest frame top edge.
Align backrest cover centrally.
Tack backrest cover with pneumatic tacker (sourcing reference: see BMW workshop equipment) front inside outwards to carrier plate (1).
/ Tacker on carrier plate at top.
4 Tacker on left and right in side area.
52 0 050 Bend new clamps closed with pliers.
Backrest cover must not show any folds.