33 32 051 Removing and Installing/Replacing Left or Right Push Rod/Integral Link

33 32 051 Replacing left or right push rod/integral link





Note:
If the integral link is detached from the swinging arm, it will be necessary to carry out the wheel alignment procedure after assembly.





Necessary preliminary work:
^ Remove rear wheel.
^ Deactivate and drain air spring/suspension system

Release shock absorber on swinging arm.

Tightening torque 33 52 4AZ.








Important!
Handle the shock absorber with care so as to avoid damaging the control unit (1) and control valve (2).





Release screw (1).

Tightening torque 33 32 5AZ.

Slacken nut (2).

Tightening torque 33 32 4AZ.

Turn lower shock absorber in direction of arrow and pull out screw (3).

Remove integral link (4).

After installation:





^ Activate and fill air spring system
^ Carry out wheel alignment procedure.

�I��|�: