52 26 ... Removing and Installing All Guide Sleeves For Rear Head Restraints

52 26 ... Removing And Installing All Guide Sleeves For Rear Head Restraints







Special tools required:
- 52 0 070







Necessary preliminary tasks:
- Remove head restraint on rear seat







NOTE:
- Guide sleeves cannot be removed without being damaged.
- Guide sleeves with locks have two retaining lugs.

Insert special tool 52 0 070 into guide hole of sleeve (2) up to upper area of retaining lug.

Feed release tongue of special tool into rear gap on retaining lug (1).

Turn tool to release sleeve (2) and pull out by lifting upwards.

On any guide sleeves with locks, unlock the second retaining lug with a screwdriver.







Installation note:
Replace guide sleeves and install as follows:

1. Short guide sleeves centre right
2. Short guide sleeve with centre left lock
3. Long guide sleeve, outer right
4. Long guide sleeve with outer left lock