52 26 311 Removing and Installing/Replacing Lock For Left or Right Rear Seat Backrest (Through-Loading System)

52 26 311 Removing And Installing/Replacing Lock For Left Or Right Rear Seat Backrest (Through-Loading System)







Unlock and fold back rear seat backrest.

NOTE: If the rear seat backrest cannot be unlocked, carry out emergency opening.

Unclip Bowden cable from holders (1).

Unfasten screws (2).

Tightening torque 52 26 07AZ.







Feed lock (1) out of installation opening slightly and unclip Bowden cable (2).

Remove lock completely from installation opening.

Installation:
Catches (2) on lock must not be damaged.
Bowden cable must be correctly anchored in catches (2).







Installation:
Slide guide lug (1) of lock into opening (2).







NOTE:
Adjustment of lock:
- Slacken screws
- Firmly push engaged backrest back
- Tighten down screws

Tightening torque 52 26 07AZ.