41 61 000 Removing and Installing Engine Compartment Lid

41 61 000 Removing And Installing Engine Compartment Lid







WARNING:
Danger of injury.
Support engine compartment lid in fully opened position with suitable apparatus.







For stripping and rigging operations, refer to texts on KSD CD (job number 41 61 000).

Necessary preliminary tasks:
Disengage gas pressure spring from engine compartment lid hinge.







IMPORTANT:
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Procedure only applicable to vehicles without active pedestrian protection, AFGS.







Release screws (1).
Tightening torque 41 61 2AZ.
Remove engine compartment lid.
Graphic similar.

Installation note:
Install engine compartment lid at screw locations to on hinge. This dispenses with the need for adjustment after installation.

If this is not possible, adjust engine compartment lid.

�YV*: