52 25 411 Replacing Backrest Cover For Left Rear Seat

52 25 411 Replacing Backrest Cover For Left Rear Seat







Special tools required:
- 52 0 050







Necessary preliminary work:
- Remove left rear seat
- Remove head restraint
- Release rear middle seat belt end fitting







With seat heating only as optional equipment:
Unfasten plug connection (1) and disconnect.







Release screws (1) from rubber retainer.
Tightening torque 52 25 03AZ.







Remove backrest cover with padding towards top.
Feed strap out of backrest cover and upholstery.







Detaching cover and upholstery:
- Release all clamps in marked area
- Remove cover from upholstery
- Remove remaining clamps from cover and upholstery

Replacement only:
- Pull all trim wires out of cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets







Installation note:
Insert new clamp (2) with special tool 52 0 050 and bend closed.
1. Upholstery
2. Clamp
3. Trim wire in upholstery
4. Trim wire in seat cover
5. Backrest cover