63 11 550 Removing And Installing/replacing The Headlight Driver Module

63 11 550 Removing And Installing/replacing The Headlight Driver Module







WARNING:
Version with xenon lighting system: Danger to life due to high voltage. Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.







Release screws (1).

Remove cover (2) in direction of arrow.







Release screws (1).

Tightening torque 63 12 3AZ.

Remove headlight driver module (2) in direction of arrow.







Installation:
When installing, make sure sealing sleeve (1) is correctly seated.







Replacement:
Teach in headlight driver module (1) via vehicle diagnosis.
- Service functions
- Body
- Lighting
- Learning turn signal indicator