63 31 ... Removing and Installing/Replacing Fibre Optic Conductor of Door Panel, Top Rear

63 31 ... Removing And Installing/Replacing Fibre Optic Conductor Of Door Panel, Top Rear







Special tools required:
- 64 1 020







WARNING: Fibre optic conductors are sensitive (risk of damage). Always handle carefully.







Necessary preliminary tasks:
- Remove rear door trim panel







Carefully detach fibre optic conductor (1) from LED module (3) (retainer).

Installation:
LED-module (3) must lock into position (light distribution).







Upper fibre optic conductor:
Use special tool 64 1 020 to unclip fibre optic conductor (3) from retaining clips (1) in door panel (2) and remove.

Installation:
The fibre optic conductor (3) must be securely locked in the retaining clips (1) on the door trim panel (2).







Installation:
Check fibre optic conductor (1) for damage (scratches or cracks), replace if necessary.