Differential Assembly: Adjustments

33 00 ... Rear axle: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:
^ Release of following screw/bolt connections:
^ Swinging arm, front/rear, to rear axle carrier
^ Swinging arm to integral link / wheel carrier
^ Guide arm to rear axle carrier / HSR unit
^ Wishbone to rear axle support / wheel carrier

^ Replacement of following parts:
1. Swinging arm
2. Guide arm
3. HSR actuator
4. Rear axle support
5. Wishbone
6. Integral link
7. Wheel carrier