61 31 336 Removing and Installing/Replacing Cover For Gear Selector Switch

61 31 336 Removing And Installing/Replacing Cover For Gear Selector Switch







Necessary preliminary tasks:
- Disconnect negative battery cable
- Remove both negative battery cables atF03
- Remove centre console cover







NOTE: Trim for gear selector switch (2) is secured from version 04/2009 with four screws.

Release screws (1) and raise trim for gear selector switch (2) slightly.
Unlock and disconnect plug connection underneath for EMF switch.
Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.







Replacement:
Remove switch for electromechanical parking brake.