52 16 022 Removing and Installing/Replacing Adjusting Unit For Thigh Support on Front Passenger Seat

52 16 022 Removing And Installing/Replacing Adjusting Unit For Thigh Support On Front Passenger Seat

Special tools required:







Move front seat into top position.
Unclip cover (1) with special tool 00 9 325 starting at the inside (arrow).







Fold up and unclip cover (1).







Move thigh support (1) as far forward as possible.







Unfasten plug connection (3) and disconnect.
Release screws (1).
Remove thigh support (2) towards top.

Installation note:
Insert screws (1) with Loctite.
Tightening torque 52 10 11AZ.







Unclip and remove cover (1) toward the top with special tool 00 9 325.

Installation note:
Secure guide pins (2) in seat frame and clip cover (1) into place.







Disconnect plug connection (1).







Release screws (1).
Tightening torque 52 10 09AZ.







Raise adjusting unit (1) complete with electric motor in direction of arrow and feed out downward.







Installation note:
Adjusting unit (1) must lie flush on facing (2).







Installation note:
Make sure latch mechanism (1) of adjusting frame is correctly on frame (2) (as illustrated).

؏�1:

��m0:

��m0:

y�m0: