52 17 ... Removing and Installing/Replacing All Trims on Left or Right Seat Rails

52 17 ... Removing And Installing/Replacing All Trims On Left Or Right Seat Rails







Trim, top rail, front:
- Move seat backwards and upwards
- Unclip cover (1) towards top and detach towards front







Clips in the marked area must not be broken.
If necessary, replace cover.







Installation:
Clip cover into the top of the seat mechanism with clips (1).







Installation:
Tilt the cover down.
Clip in cover on the left and right.







Trim, top rail, side:
Feed trim out of seat mechanism:
1. upwards,
2. slide towards rear

Feed out trim.







Trim, bottom rail, front:
1. Move seat backwards
2. Unclip trim tongue towards top, sliding trim towards front slightly
3. Pull inside surface of trim inwards slightly and unclip
4. Detach trim towards front from bottom rail

Installation:
Place trim on bottom rail and slide towards rear to engage, feeding in below trim, top rail, outer.







Cover is not permitted to exhibit stress whitening in the marked area.
If necessary, replace cover.







Retaining lugs in the marked area must not be broken.
If necessary, replace cover.







Trim, bottom rail, rear:
1. Move seat forwards
2. Unclip trim tongue towards top
3. Pull inside surface of trim inwards
4. Detach trim towards rear from bottom rail







Cover is not permitted to exhibit stress whitening in the marked area.
If necessary, replace cover.







Retaining lugs in the marked area must not be broken.
If necessary, replace cover.







Installation:
Clips and hooks must not be damaged.
Make sure trims are exactly seated.
After completing tasks, move seat and make sure that trim does not move.