52 16 021 Removing and Installing/Replacing Adjusting Unit For Thigh Support on Driver's Seat

52 16 021 Removing And Installing/Replacing Adjusting Unit For Thigh Support On Driver's Seat







Necessary preliminary tasks:
- Remove driver's seat.







Move thigh support forwards as far as possible.
Unfasten plug connection (1) and disconnect.
Unfasten screws (2).

Installation:
Insert screws (2) with Loctite.
Tightening torque 52 10 11AZ.







Release screws in areas (1).
Tightening torque 52 10 09AZ.
Feed out adjusting unit (2) complete with drive in direction of arrow and remove.







NOTE: Carry out function check with adapter cable

��m0: