52 26 155 Installing and Removing/Replacing the Rear Seat Cover

52 26 155 Installing And Removing/Replacing The Rear Seat Cover







Special tools required:
- 52 0 050







Necessary preliminary tasks:
- Remove rear seat
- Remove outer cover







Unhook seat cover in marked area.







Unhook welt.
Disconnect retainers in marked area







Unhook welt.
Cut open cable tie (2).

Installation:
Replace defective cable ties.

Disconnect retainers in marked area
Remove seat cover (1) with support.







Disconnect retainers in marked area







Disconnect retainers in marked area
Remove all remnants of clips from cover and support.

Replacement only:
- Pull all trim wires out of cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets







Installation:
Insert new clamp (2) with special tool 52 0 050 and bend closed.
1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in seat cover
5. Seat cover