52 26 199 Removing and Installing/Replacing Rear Panel on Left Rear Seat Back

52 26 199 Removing And Installing/Replacing Rear Panel On Left Rear Seat Back







Necessary preliminary tasks:
- Remove left backrest cover







Remove folding covers on left and right:
Detach cover (1).







Release screws (1).
Tightening torque 52 26 08AZ.
Remove folding cover.







Pull off rear panel (1).







If necessary, use flat scraper (1) to separate rear panel (2) from rear seat backrest.

Installation:
Comply with instructions issued by manufacturer of universal spray adhesive.
Apply universal spray adhesive to rear panel and rear seat back.
Fit and align rear panel within the air drying time (see manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from slipping.