Front Seat, Normal, Manual

52 26 ... Removing And Installing Left Or Right Damper







Necessary preliminary tasks:
- Remove left or right rear seat







IMPORTANT:
- Never lift off ball socket with engaged retainer.
- Replaced overelongated retainers.
- Before installation, grease ball socket if necessary.

Installation:
Pack grease into two opposite positions in socket.
The grease spreads after installation on the ball pin all round in the ball socket.







Removing/installing ball sockets:
1. Push on retainer in direction of groove with screwdriver
2. Lift off ball socket from ball pin
3. Slide retainer back
4. Fit ball socket on ball stud and snap into place with force







Removing left or right damper:
- Push on locking clamps (1)
- Detach ball sockets at sides.