Removing And Installing/Replacing Left Active Bonnet/Hood Lock

51 23 101 Removing And Installing/Replacing Left Active Engine Compartment Lid Lock







Necessary preliminary tasks:
- Disconnect negative terminal
- Remove side engine compartment lid gasket mounting in working area







NOTE: Graphic for example purposes only (originates from F01).

Remove all screws (1) at join (2) from engine compartment lid door lock to centre of vehicle; slacken remaining screws (1).
Tightening torque 51 61 6AZ.

NOTE: Connection (2) does not have to be removed.







Release screws (2) on engine compartment lid lock (1).
Tightening torque 51 23 2AZ.







NOTE: Shown removed here for purposes of clarity.

Disengage, unlock and disconnect plug connections (1) at lock carrier.
Disconnect Bowden cable (2).
Feed engine compartment lock (3) towards front/top.







NOTE:
Replace sensors in bumper, if damaged:
- Replace left pedestrian protection
- Replace centre pedestrian protection
- Replace right pedestrian protection

Version as optical fibre:
- Replace pedestrian protection sensor

�O�/�~�/: