Trunk / Liftgate Lock: Service and Repair

51 24 050 Removing And Installing/Replacing Lock Element (Lock Cylinder) For Rear Lid

Necessary preliminary tasks:
- Remove trim strip from rear lid centre section

Release screws (1).
Tightening torque 51 24 02AZ.

Installation:
Press counter-supports (1) at back to prevent accompanying rotation.

Unclip Bowden cable sleeve (1).
Feed out Bowden cable nipple in direction of arrow.

Installation:
Make sure Bowden cable (1) is correctly positioned in rear lid.
Lay Bowden cable (1) without kinks.

Installation:
Perform function check with rear lid open.