Removing And Installing/Replacing Right/Rear Suspension Cross-Brace

51 71 346 - Removing and installing/replacing right/rear suspension cross-brace





Important!
Driving without the suspension cross-brace is not permitted. (risk of damage to the body).





Release expander rivets (1) and remove cover (2).

Installation Note:
Replace damaged expander rivets.
Holder of cover (2) must snap into place in suspension cross-brace during installation.





Release screw (1).
Tightening torque 51 61 1AZ.
Remove suspension cross-brace (2).

Installation Note:
Make sure suspension cross-brace (2) is in correct installation position.
Replace screw (1).