Radiator Cooling Fan: Service and Repair

17 11 035 Removing and installing/replacing fan cowl with electric fan (N54)





Necessary preliminary tasks:
^ Read out fault memory of DME control unit
^ Turn off ignition
^ Remove cross-member





Release screw (1) on fan cowl.

Tightening torque 17 10 4AZ.

Detach charge-air duct (2) from fan cowl.





Unlock and disconnect plug (1) on fan cowl on right.





Unclip fan cowl (1) at retainers (2) on left and right, feed out in upward direction and remove.





Installation:
Insert retaining tab (1) at bottom on module carrier.

Note:
Check stored fault message.





Reassemble the vehicle.

Clear fault memory.