61 14 010 Removing and Installing/Replacing Distribution Box (on Battery)

61 14 010 Removing And Installing/Renewing Distribution Box (On Battery)







WARNING: Observe safety instructions for handling vehicle battery.







Necessary preliminary work:
- Disconnect battery cable







Fold up covers (1). Unscrew nuts (2).
Tightening torque 61 21 2AZ.
Unscrew nut (3).
Tightening torque 61 21 3AZ.
Disconnect plug connection (4).







Press locking brackets (1) downwards and unclip in direction of arrow.
If necessary, using a screwdriver, expand locking bracket (1) at lower end and clip out.
Remove distribution box (2) towards top.