63 11 550 Removing and Installing/Replacing Headlight Driver Module

63 11 550 Removing And Installing/Replacing Headlight Driver Module







WARNING:
Version with xenon lighting system:
Danger to life due to high voltage.
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.







Necessary preliminary tasks:
- Remove front left wheel arch trim







Release screws (1) on headlight (2).
Tightening torque 63 12 3AZ.
Remove headlight driver module (3) in direction of arrow.







Unlock plug connection (1) and disconnect in direction of arrow from headlight driver module (2).







Installation:
When fitting, make sure headlight driver module (1) is correctly seated on sealing sleeve (2).







Replacement:
Teach in headlight driver module (1) via vehicle diagnosis.
- Service functions
- Body
- Lights
- Learning turn signal indicator