63 12 860 Replacing Control Unit For Left Xenon Headlight

63 12 860 Replacing Control Unit For Left Xenon Headlight







WARNING:
Version with xenon lighting system:
Danger to life due to high voltage.
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.
Comply with notes and instructions on handling exterior lights.







Necessary preliminary tasks:
- Remove left headlight







Release screws (1).
Tightening torque 63 12 5AZ.
Remove control unit for xenon headlight (2) upwards from headlight (3).







Installation:
When installing control unit for xenon headlight (1), make sure sealing sleeve (2) is correctly seated.