65 77 532 Removing and Installing/Replacing Front Left Sensor (Acceleration Sensor)

65 77 532 Removing And Installing/Replacing Front Left Sensor (US Version Only)







Necessary preliminary tasks:
- Remove front left wheel arch cover







NOTE: This work step varies according to engine type.

Release screw (1) on auxiliary radiator bracket (2).
Remove holder (2) and carefully place to one side.

Installation:
Holder (2) must be correctly seated in the designated guides.







Release screws (1) on lock carrier (2).
Tightening torque 65 77 2AZ.
Feed out sensor (3).
Unfasten plug connection (2) and disconnect.

Installation:
Make sure sensor (3) is in correct installation position.
Sensor surface must point upwards.
Plug connection (2) must point in opposite direction to direction of travel.