Brake Light Switch: Service and Repair

61 31 310 Replacing Brake Light Switch







Necessary preliminary work:
- Remove trim panel for pedal mechanism.







Disconnect plug connection (1).
Pull brake light switch (2) in direction of arrow out of brake light switch holder (4).

Installation note:
- Press brake pedal (3) to floor.
- Push brake light switch (2) as far as it will go into brake light switch holder (4).
- Counter hold brake light switch (4) holder, slowly return brake pedal (3) to initial position and tighten to stop.







NOTE:
Removing brake light switch holder (1):
Press brake pedal.
Unclip brake light switch holder (1) at shanks (2) and remove towards rear.