Removing and Installing/Replacing Control Unit For Top-/Rear-/Side-View Camera

66 53 670 - Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Clamp off battery negative lead 61 20 900 Disconnecting and Connecting Negative Battery Cable
- Remove luggage compartment wheel arch trim on left .





Disconnect plug connections (2).
Unscrew nuts (1).
Remove control unit (3) in direction of arrow.

Installation Note:
Make sure control unit (3) is correctly installed.





Replacement:
Carry out programming/coding Programming and Relearning.
carry out calibration:
- Service functions
- Body
- Display and information functions
- Panoramic view camera
- Calibration of reversing camera