Removing and Installing/Replacing Control Unit for Night Vision System

66 54 005 - Removing and installing/replacing control unit for Night Vision System





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Negative Battery Cable
- Remove folding compartment on driver's side Removing And Installing/Replacing Drivers Side Hinged Compartment





Disconnect plug connection (1).
Release bolt (2) and remove control unit (3) in direction of arrow.





Installation Note:
Make sure guides (1) of control unit (2) are correctly seated.





Replacement:
Carry out vehicle programming/coding Programming and Relearning.

Note:
New component contains a CD with deblocking code.
CD is requested during coding/programming by the SSS.