24 50 010 Replacing Emergency Actuator

24 50 010 Replacing emergency actuator





Necessary preliminary tasks:
^ Remove centre console.
^ Remove rear underbody protection
^ Remove left retaining plate from underbody protection
^ Support transmission with lifter.
^ Remove transmission crossmember.
^ Remove transmission support bracket





Unfasten nut.

Remove cable (1).

Installation:
Adjust gearshift lever.





Slacken nut (1).
Tightening torque 24 51 2AZ.

Release cable from pipe clamp (2).





Note:
- Reinstall transmission support bracket and transmission crossmember
- Lower vehicle





Release nuts (1) and remove emergency actuator (2) in upward direction.