P060C

200C08 - P060C

Information saved in
DME

Fault code
200C08 - P060C

Fault text
DME, internal fault, control-unit fault, internal monitoring:
host-computer monitoring; operations-set fault

Fault description
The diagnostic function monitors internal operations within
the control module to ensure that they are executed
correctly.

Condition for fault identification
Test condition:
The fault is recognized when an internal comparison detects
excessively high deviations.
Potential problem source(s):
- Collateral fault from programming error
- Defective DME
Terminal condition: Terminal 15
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- Immediate
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- If faults related to programming are present, repair these
first
- If the diagnostic fault code has been entered with a
frequency > 3, then replace the DME

Fault effect and breakdown warning
Breakdown notice:
- Allow vehicle to enter sleep mode, then restart may resolve
the problem, although the remedy may only be temporary
Possible apparent symptoms:
- Engine is impossible to restart

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: on

Service instruction
- none