P10AF

115D04 - P10AF

Information saved in
DME

Fault code
115D04 - P10AF

Fault text
Injection quantity compensation, plausibility: Energy
nominal value

Fault description
The diagnostic function monitors whether the energy value
has been coded and whether it lies within a plausible range.
Incorrectly encoded data that lie within the thresholds are
not recognized

Condition for fault identification
Test condition:
The fault is recognized when the energy value of at least one
injector lies above 70.8 mJ or below 52.9 mJ.
Potential problem source(s):
- At least one injector not encoded
- Incorrect injector coding
Terminal condition: none
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- None
Other conditions:
- Engine on

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Code low-flow and energy value

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- Engine can run roughly

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- The diagnostic fault code can be deleted if the energy
value is plausible